CODESYS
octoplant supports the management of CODESYS projects and enables the cyclic monitoring of devices that have been projected with this development environment.
Device Support Level
Key features and functions
Workflow
From |
CODESYS |
||||
---|---|---|---|---|---|
V 2.1 |
V 2.3 | V 3.5 SP 9 | V 3.5 SP 10 -SP 15 | V 3.5 SP 16-SP 18 | |
octoplant 101 | ✓ | ✓ | ✓ | ✓ | |
octoplant 101.1.0 | ✓ | ✓ | ✓ | ✓ | ✓ |
Other system requirements
- The upload is carried out using the CODESYS PLC Handler.
- The comparison requires an installed CODESYS Editor with the compatible version.
octoplant automatically searches through the listed software for the correct editor in the following order (*only CODESYS V2X):
- CODESYS
- SoMachine (CODESYS V3)
- CPS21 (Bosch)*
- TwinCat (Beckhoff)** TwinCAT V3 contains its own editor.
- MOVITOOLS® MotionStudio (SEW-EURODRIVE)*
- ELAU (Schneider Electric)
- Indralogic (Bosch Rexroth)*
- EATON
Limitations
CODESYS V2.X:
-
For technical reasons, Project information and Block properties are not recognized during comparison.
CODESYS V3.X:
-
Visualisation and user management are not supported.
Related topics |
---|
Scripting |
In this tutorial:
Last updated: