Skip to content

Creating jobs

Prerequisite

To perform the upload for Atlas Copco nutrunner controls, the executing service must be run under a specific user account. This user account must be a member of the Administrators group. The upload for Atlas Copco nutrunner controls cannot work if the VDog MasterService application or the applications VDog UploadAgent/VDog CompareAgent are running under the Local System user account.

To configure jobs for Atlas Copco nutrunner controls

  1. Start the AdminClient and open the Jobs module.
  2. Select your Atlas Atlas Copco component in the Project tree.
  3. Click on the Create button in the menu bar or drag and drop the component into the Jobs area.
  4. Check that the upload type Atlas Copco Tightening Systems is selected in the Job configuration area.

  5. Configure general sections General, Notification, Upload and compare and Create a version automatically after job run. The sections Notification and Create a version automatically after job run are only displayed if the settings required for this have been made.

    Info

    The upload is carried out using the ttpf.exe tool (ToolsTalk Power Focus 4000 or ToolsTalk Power MACS) from Atlas Copco, which must be installed and licensed on the computer carrying out the upload.

    When using agents, the tool must be running on the computer on which the agents have been installed.

  6. Configure the Atlas Copco Tightening Systems Settings section:

    Figure: Job configuration, Atlas Copco Tightening Systems settings section

    1. Under Project, select the Atlas Copco nutrunner control project from the dropdown menu. This option is only relevant if there is more than one Atlas Copco nutrunner control project in the component.
    2. Under Device, enter the IP address or the name of the device.
    3. Under Port, change the port if necessary. The port 6543 is set by default.

  7. Configure the File specifications and compare settings section.

    Figure: Job configuration, File specifications and compare settings section

    Here you can customize the comparison for the job.

    1. Activate the Enable custom configuration for this job checkbox.
    2. Click on the Edit button.
    3. The Settings for backup files dialog opens.

    Figure: Settings for backup files dialog

  8. Save the job and test it with Execute selected jobs once.

Info

The backup created is identical to the project created by ToolsTalk Power Focus or ToolsTalk Power MACS.

Info

You can implement further settings for jobs of this upload type in the AdminClient in the Global settings dialog and by using the INI files.