Skip to content

Configuring jobs for Schneider Modsoft

  1. Create a job with the Schneider Modsoft upload type.
  2. Go to the Schneider Modsoft settings section.
  3. If the component contains several projects, select the desired project from the dropdown menu.
  4. Select the Access path for communication with the device. The PC->[TCP/IP]->PLC and PC -> [TCP/IP]-> Gateway -> [MODBUS+] -> PLC paths are available.
  5. The option Bridged Modbus Plus is only available if you have selected the PC -> [TCP/IP] -> Gateway -> [MODBUS+] -> PLC access path.
  6. In the Device field, enter the IP address or the name of the device.
  7. Go to the Advanced section.
  8. In the Sleep between packets field, enter a delay of 0ms to 5000ms. The default value is 0ms. Higher values are recommended if interference or transmission errors occur.