SEW MOVITOOLS¶
octoplant supports the management of MOVITOOLS® MotionStudio projects and enables the cyclical monitoring of devices that have been configured with this development environment.
Device support level¶
Key features¶
Workflow¶
System requirements¶
MOVITOOLS® MotionStudio | 5.6.0 SP1 | 5.72 | 6.0.0.1 | 6.10 | 6.20 | 6.30 | 6.40 |
---|---|---|---|---|---|---|---|
octoplant 101 | ✓* | ✓* | ✓ | ✓ | ✓** | ✓** | ✓** |
* Upload only
** For the upload, it is necessary to run the service(s) in application mode.
Example for the server:
"C:\Program Files (x86)\vdogServer\VDogMasterService.exe" /at:s /rd:D:\vdServerArchive /app /visible
Examples for the agents:
"C:\Program Files (x86)\vdogAgents\VDogCompareAgent.exe" /at:s /rd:D:\vdAgentArchive /app /visible
"C:\Program Files (x86)\vdogAgents\VDogUploadAgent.exe" /at:s /rd:D:\vdAgentArchive /app /visible
Other system requirements¶
A licensed version of MOVITOOLS® MotionStudio must be installed on the octoplant server or the computer from which the upload is performed (server or agent).
Supported units from SEW-EURODRIVE:
MOVIDRIVE (B) MOVITRAC (B) MOVIAXIS MOVIMOT (D) MOVIFIT (Technology, Classic) MOVIGEAR (DSC, DAC, DBC, SNI) DRC (DSC, DAC, DBC, SNI) MOVIPRO (SK, SDC, ADC) MOVI-PLC (basic, advanced) CCU (advanced, power)
Notes on comparison¶
- Unit data is compared with the VarData interpreter application from MOVITOOLS® MotionStudio.
-
Units that are only integrated via networks are not taken into account in the parameterization comparison.
-
In addition to the parameters that are excluded from the comparison by the VarData interpreter, octoplant also excludes the following parameters:
8455.0: PA1 setpoint | 9081.0: Debug address 5 |
---|---|
8456.0: PA2 setpoint | 9082.0: Debug address 6 |
8457.0: PA3 setpoint | 9083.0: Debug address 7 |
8458.0: PE1 actual value | 9084.0: Debug address 8 |
8459.0: PE2 actual value | 9085.0: Debug index 1 and 2 |
8460.0: PE3 actual value | 9086.0: Debug index 3 and 4 |
8705.0: Sampling time | 9087.0: Debug index 5 and 6 |
8706.0: Scope tracking cycles | 9088.0: Debug index 7 and 8 |
8707.0: Scope trigger source | 9089.0: Trigger behavior |
8708.0: Scope rising edge | 9090.0: Trigger selection |
8717.0: Scope debug address 1 | 9091.0: Trigger source |
8718.0:Scope debug address 2 | 9092.0: Trigger mode |
8719.0: Scope debug address 3 | 9093.0: Analog trigger level |
8720.0: Scope debug address 4 | 9094.0: Analog trigger hysteresis |
9095.0: Analog trigger mask |