Skip to content

Configuring jobs

To back up the data of the AUVESY T-5000 device at regular intervals, you can create a job for the T-5000_456456123 component in the AdminClient.

In our example, the project data is stored manually by the users under the same path (network/local). The path is \\share\456456123\T-5000.

  1. Start the AdminClient and open the Jobs module.
  2. Select your component T-5000_456456123 in the Project tree.
  3. Select the Create button in the menu bar or drag-and-drop the component into the Jobs section.
  4. Select the Network (UNC) upload type in the Job configuration area.
  5. In the Execute dropdown menu, select According to schedule and configure the intervals at which the job should be executed in the Schedule dialog. The job then checks the target directory at the specified intervals to see whether the data is up-to-date, saves the current data and issues a warning if the data is old.
  6. Configure the general sections General, Notification, Upload and compare and Create a version automatically after job run. The sections Notification and Create a version automatically after job run are only displayed if the settings required for this have been made.
  7. Make the desired settings in the Network (UNC) settings section. In the Resource field, enter the front part of the path, \\share\456456123. Enter the component directory itself, \T-500, in the Subdirectory field.
  8. If required, configure the Advanced and File specifications and compare settings sections.

  9. Save the job and execute it for testing with the Execute selected jobs once button.

    Figure: Job configuration for component T-5000