Skip to content

SINUMERIK ONE plugin

To integrate SINUMERIK ONE projects into octoplant, you must install the SINUMERIK ONE plugin on the HMI.
The latest version of the plugin is available in the Tools/Sinumerik/ONE subdirectory of the octoplant Setup.

Info

  • The plugin version must exactly match the SINUMERIK ONE version. Different versions are not compatible.
  • The CNC version differs from the NCU/Operate version. Use the Operate version.
  • Only the first three digits of the version number (XX.XX.XX) are relevant for plugin installation.

You can determine the correct SINUMERIK ONE version using one of two methods described below.

Reading the SINUMERIK ONE Version via the HMI

  1. Select the menu select button to open the menu.
  2. Select diagnosis.
  3. Select the version button.
  4. In the version data dialog, select the system software NCU line and then select details.
  5. View the SINUMERIK ONE version (XX.XX.XX) in a separate line.

If the PCU and NCU versions differ, use the PCU version.

Tip

For a visual walkthrough of this procedure, see the official Siemens guide:
How can I save the version information of my machine on a SINUMERIK ONE, 840D sl, or 828D?

Reading the SINUMERIK ONE version from the version.xml file

You can also find the version in the version.xml file. To do this, look for the SINUMERIK Operate attribute in the version tag.

The version.xml file is located:

  • On the NCU: \card\siemens\sinumerik\hmi
  • On the PCU: {Drive}:\{Installation directory}\Siemens\MotionControl\Siemens