PHOENIX CONTACT MGUARD
versiondog supports the management of PHOENIX CONTACT MGUARD routers and enables the automatic creation of backups as well as the cyclical monitoring of the routers.
Supported versions
| From version | Webbrowser |
|---|---|
| versiondog 6.0 | ✓ |
Ports & protocols
- To execute the job, the necessary outgoing and incoming ports must be enabled on the server, the switch, and all intermediate network devices. By default, these include the SSH and TFTP ports.
- Only one switch at a time can be accessed via the TFTP port. To back up multiple switches simultaneously, configure a unique TFTP port for each switch. You can increase the maximum number of parallel uploads in the
Upload\AgentStation.inifile.
Integration features
- Custom component type
- Consistent change history
- Detailed comparison for configuration and firmware (version <-> version detailed comparison)
- Automatic monitoring of the differences between the program on the device and the current version on the server (detailed comparison: prev. backup <-> backup, server version <-> backup)
- Automated backup for disaster recovery
Configuration
To get the basic workflow for intergrating the device, open General workflow.
Device-specific settings for this device, such as job configuration, can be found on the following pages: