Skip to content

RSLogix 5

versiondog supports programmable logic controllers that work with the RSLogix 5 and PLC-5 software from Rockwell Automation and enables the cyclical monitoring of devices that have been configured with this development environment.

Figure: Integration RSLogix 5

Supported versions

RSLogix 5 & RSLinx V7.X V8.X
versiondog 3.2 ✓
versiondog 4.0 ✓ ✓

Requirements

  • To perform uploads, the following software must be installed on the same machine where the server or an agent is running:

    • RSLogix 5 (Standard and Professional Edition)
    • RSLinx Classic or FactoryTalk Linx (formerly RSLinx Enterprise Edition)

  • If upgrading to FactoryTalk Linx:

    • Uninstall RSLinx Classic before proceeding.
    • Manually reconfigure the communication path in the Job configuration section.
    • If you are using agents, ensure the services are running with administrative privileges.

  • You can review the full system requirements for RSLogix 5 on the Rockwell Automation website.

  • For uploads to work properly, the VDog MasterService, VDog UploadAgent, and VDog CompareAgent must not run under the LocalSystem account. Use an administrator account or one with administrative rights instead.

  • To ensure reliable communication, it is recommended to launch either the agent or the VDog MasterService (whichever is in use for this device) as an application, under the following conditions:

    • If the RSLogix software is installed on a different machine, agents are required on that machine.
    • Agents must be capable of launching and interacting directly with the RSLogix software.
    • The setup requires both administrative rights and UI access.

    For detailed instructions, see Starting agents and VDog MasterService as applications

Integration features

  • Custom component type
  • Integrated RSLogix 5 project tree
  • Consistent change history
  • Detailed graphical comparison
  • SmartCompare for RSLogix 5 projects (version <-> version comparison)
  • Automatic monitoring of the differences between the program on the controller and the current version on the server (detailed comparison: prev. backup <-> backup, server version <-> backup)
  • Support of RSLogix 5 multi-projects
  • Automated backup for disaster recovery
  • Asset inventory support

Configuration

To get the basic workflow for intergrating the device, open General workflow.

Device-specific settings for this device, such as job configuration, can be found on the following pages: