Schneider Concept

versiondog supports the management of Schneider Concept projects and enables the cyclical monitoring of devices that have been configured with this development environment.

A basic knowledge of the concepts of versiondog and experience in working with Schneider Concept is required.

Supported versions

Supported controllers

• QUANTUM:x13 0x_X
• QUANTUM:x13 0x
• VME:424 0x
• QUANTUM:424 0x_X
• QUANTUM:424 0x
• QUANTUM:434/534
• COMPACT:A145
• 685E:924
• MOMENTUM:171 CCC ??0 ?0-IEC (with 1.30.2.0)
• MOMENTUM:171 CCC 9?0 91
• MOMENTUM:171 CCC ??0 ?0-984
• ATRIUM:180 CC0 121 (from and including v 2.6.0)
• ATRIUM:180 CC0 241 (from and including v 2.6.0)
• ATRIUM:180 CC0 S908 (from and including v 2.6.0)

Requirements

• The Schneider Concept editor cannot open projects whose path is longer than 29 characters. An error message can be avoided by separating the component directory from the working directory. The path of the working directory must be shorter than 29 characters.
• If relevant changes have been made to the project after the upload to the PLC, a warning is issued.
• It is strongly recommended that edited projects are always versioned after the upload to the PLC. Otherwise the time stamps of the backup and the current version may no longer match, which can cause problems during operation.

Integration features

• Custom component type
• Integrated Schneider Concept project tree
• Direct opening of the editor from the UserClient
• Consistent change history
• Custom upload type
• SmartCompare for Schneider Concept projects (version <-> version detailed comparison)
• Automatic monitoring of the differences between the program on the device and the current version on the server (server version <-> backup detailed comparison)
• No additional software required

Configuration

To get the basic workflow for intergrating the device, open General workflow.

Device-specific settings for this device, such as job configuration, can be found on the following pages:

• Configuring jobs